Cutting Center Service for Sheet Metal
For example: plates, flanges, disks, rings, shaped tailored.
We offer: osxycut, plasma, laser, waterjet.
We offer: osxycut, plasma, laser, waterjet.
OXYCUT & Plasma:
Sheet Metal cutting up to 2500 x 12000 mm Thickness:
Ossidric cut: FE: 5 ÷ 300 mm; Precision ± 0,5 mm
Plasma cut: FE: 5 ÷ 35 mm; INOX: 5 ÷ 40 mm
Head± 45°; Precision: ± 0,2 mm
Ossidric cut: FE: 5 ÷ 300 mm; Precision ± 0,5 mm
Plasma cut: FE: 5 ÷ 35 mm; INOX: 5 ÷ 40 mm
Head± 45°; Precision: ± 0,2 mm
Laser:
Laser source 3000 W
Sheet Metal cutting up to 3000 x 1500 mm thickness:
FE: 0,5 ÷ 15 mm
Inox: 0,5 ÷ 10 mm
Allumium: 0,5 ÷ 5 mm
Precision: ± 0,1 mm
Sheet Metal cutting up to 3000 x 1500 mm thickness:
FE: 0,5 ÷ 15 mm
Inox: 0,5 ÷ 10 mm
Allumium: 0,5 ÷ 5 mm
Precision: ± 0,1 mm
Waterjet (water cutting):
Hydro-abrasive cutting plant
Pression upto4000 bar.
Max dimenstion sheets: 2000x4000 mm.
ALL MATERIALS
Thickness: 0,5 ÷ 100 mm
See some Waterjet Examples.
Pression upto4000 bar.
Max dimenstion sheets: 2000x4000 mm.
ALL MATERIALS
Thickness: 0,5 ÷ 100 mm
See some Waterjet Examples.
Features dand benefits of cutting water with added abrasive:
- Possibility to obtain complex shapes due to the NCC, as a consequence of perfection: form - inlay - Mosaic - joints
- No deformation during cutting or mechanical - or heat - or physical - or chemistry and subsequent workability unchanged after cutting.
- Versatility: all existing materials known.
- Precision: ± 0,1 mm/m.
- Finishing quality, which does not require additional polishing.
- Minimal waste of material with the cutting groove of ± 1 mm.
Materials cut:
Metals Metal (alloys and special steels, titanium, copper, aluminum)
Plastic ( Plastic (polyethylene, polyurethane ...)
Composites, Marble, Granite, Glass, Rubber ...
Our offer:
- Creativity: a goo help to your technical staff and design engineers
- Flexibility: immediate scheduling with customers material
- Delivery: mandatory and guaranteed.
- Just in time service.
- Possibility to obtain complex shapes due to the NCC, as a consequence of perfection: form - inlay - Mosaic - joints
- No deformation during cutting or mechanical - or heat - or physical - or chemistry and subsequent workability unchanged after cutting.
- Versatility: all existing materials known.
- Precision: ± 0,1 mm/m.
- Finishing quality, which does not require additional polishing.
- Minimal waste of material with the cutting groove of ± 1 mm.
Materials cut:
Metals Metal (alloys and special steels, titanium, copper, aluminum)
Plastic ( Plastic (polyethylene, polyurethane ...)
Composites, Marble, Granite, Glass, Rubber ...
Our offer:
- Creativity: a goo help to your technical staff and design engineers
- Flexibility: immediate scheduling with customers material
- Delivery: mandatory and guaranteed.
- Just in time service.